Home Solutions Gold Heap Leaching Production Line
Gold Heap Leaching Production Line

Gold Heap Leaching Production Line

【Process Introduction】:The gold ore heap leaching process is to crush low-grade gold ore to a certain size (or granulate), and pile it on a leak-proof bottom mat paved with materials such as asphalt, concrete or plastic, and use low-concentration cyanide, alkaline solution, Solutions such as non-toxic solvents or dilute sulfuric acid are sprayed on the ore pile to dissolve the gold, and the gold-containing solution is infiltrated from the ore pile, and then the gold is recovered by methods such as activated carbon adsorption or zinc powder replacement precipitation.

【Application Scope】:Heap leaching gold from gold mines is often used to develop gold mines with small ore bodies or low grades, or both, and deposits that cannot be developed and utilized by conventional methods.

24-hour service hotline 137-9354-4858

Heap leaching gold extraction process

heap leaching gold extraction process

Process introduction

The requirements for terrain conditions are not high, and measures can be adapted to local conditions, and permanent unloading yards or stacking yards can be set up according to the characteristics of the terrain. For example, the tops and slopes of hills are relatively gentle and open, so they are suitable for building permanent dumping yards.

Raw ore processing

The raw ore is crushed to a certain particle size (30-50mm) by the jaw crusher and cone crusher produced by Xinhai, and then goes directly to the heap ; Or carry out granulation treatment (agglomerate finer particles into coarse powder agglomerates), and then transport the ore by forklift to the mine pile for stacking.

Heap leaching system

Set up a pile leaching system on the paved ore pile. After the cyanide solution reacts with the mine pile, the gold-containing solution (precious liquid) seeps from the bottom of the mine pile, flows into the precious liquid pool, and is pumped into the adsorption column by the precious liquid pump. Reuse of the shower system.

Production case

The overall picture of the system in the Tanzania Gold Mine Project of Xinhai Mining. The desorption electrolysis device of this project is one of the core equipment of the "all-slime cyanide gold extraction" program. The desorption electrolysis system adds cations that are easily adsorbed by activated carbon into the desorption body to replace Au(CN)2- to realize gold The precious liquid obtained by desorption of gold-loaded carbon is recovered by ionization method to obtain solid gold.

Process Equipment

Online message

You can fill in your demand information in the form below, and our technical and sales staff will get in touch with you as soon as possible. In order to ensure that your information can be processed in a timely manner, please be sure to fill in your contact number accurately!

  • Please fill in the detailed demand information:

  • If the above information cannot meet your needs, please fill in your specific needs here!

e