【Product Introduction】：The wet rod mill is a grinding equipment that uses steel rods as grinding media.
【Applicable Materials】：Rod mills are mainly used for rough grinding operations. It is suitable for fine crushing and coarse grinding of ore in the first stage of open-circuit grinding, especially suitable for processing brittle materials.
【Product Application】：Xinhai wet rod mill has three types of rod mills: overflow rod mill, end-peripheral discharge rod mill, and center-peripheral discharge rod mill, which can meet the different needs of customers.
The tapered end cover of the rod mill has a small curvature, which enables the steel rod to move regularly in the mill;
The diameter of the discharging hollow shaft is large, which is convenient for maintenance, and at the same time, it can reduce the slurry level and discharge the ore quickly;
The product has uniform particle size and less over-crushing.
The Xinhai rod mill is decelerated by a motor through a reducer and surrounding large gears, or a low-speed synchronous motor is directly decelerated through a surrounding large gear to drive the cylinder to rotate. A suitable grinding medium-steel rod is installed in the cylinder. The grinding medium is lifted to a certain height under the action of centrifugal force and friction force, and falls in the state of being thrown or vented. The ground material continuously enters the inside of the cylinder from the ore inlet, is crushed by the moving grinding medium, and is discharged out of the machine through the force of overflow and continuous ore feeding for the next process operation.
1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts.
2. Pay attention to the verticality between the main body and the horizontal when installing.
3. After installation, check whether the bolts at each part are loose and whether the main unit door is fastened. If so, please tighten it.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, a no-load test run is carried out, and the test run is normal and production can be started.
|Motor model||Motor power
|Processing capacity (t/h)||effective volume (m3)||weight
The Energy Saving Ball Mill is a high-efficiency and energy-saving grid-type ball mill that uses rolling bearings.
The wet rod mill is a grinding equipment that uses steel rods as grinding media.
Wet grid type ball mill is a traditional ball mill that relies on the discharge grid to discharge ore forcibly.
You can fill in your demand information in the form below, and our technical and sales staff will get in touch with you as soon as possible. In order to ensure that your information can be processed in a timely manner, please be sure to fill in your contact number accurately!