【Product Introduction】：The Energy Saving Ball Mill is a high-efficiency and energy-saving grid-type ball mill that uses rolling bearings.
【Applicable Materials】：Energy-saving ball mills are often used to grind coarse-grained ores
【Production Capacity】：Up to 160t/h
【Product Application】：The wet ball mill can be widely used in the production industries of cement, silicate products, new building materials, refractory materials, fertilizers, ferrous and non-ferrous metal beneficiation
The transmission of the mill equipment adopts large double-row spherical roller bearings instead of sliding bearings, which greatly reduces friction, is easy to start, and saves 20-30%;
Using corrugated liner, increase the ball ore contact surface, strengthen the grinding effect, and have the ability to lift the ore, reducing energy consumption;
Small mill with a diameter of less than 2.1 meters (not including 2.1 meters), adopts an integral frame, which is convenient for civil construction and equipment installation;
The main component of the Xinhai wet ball mill is a cylinder with a small diameter and a large length. It rotates slowly through a transmission device. The material is fed from the feeding end of the cylinder. Throwing impact and self-grinding, the material can be crushed. Due to the continuous feeding of materials, the pressure causes the materials in the cylinder to move from the feeding end to the discharging end. The material reaching the finished product size is discharged from the discharge end of the cylinder. During wet grinding, the material is carried out by the water flow; during dry grinding, the material is carried out by the air flow. The straight-tube energy-saving grid ball mill has a discharge grid at the discharge end. The mill relies on the grid plate to force ore discharge. The slurry surface in the cylinder is low, reducing ore over-grinding and preventing steel balls from being discharged. Under the same production conditions, the production capacity is higher than that of overflow mills. Rolling bearings are used to replace sliding bearings at both ends of the cylinder, which saves significant energy.
Maintenance and overhaul of the lattice ball mill is a regular work. The quality of the maintenance work directly affects the operation rate and service life of the ball mill. In order to find defects in time and eliminate hidden dangers to ensure the normal operation of the mill, except In addition to routine maintenance, grinding needs to be stopped regularly (once a month is recommended). Important parts such as hollow shafts, main bearings, cylinders, reducers, gears, etc. should be carefully inspected, and detailed records should be made. Properly handle and arrange mid-repair and overhaul plans. So how to properly maintain and repair during use.
1. For the specific requirements of the main bearing part, please refer to the main bearing assembly drawing. 2. Refer to the assembly drawing of the rotating part for the cylinder part. 3. For the transmission part, please refer to the assembly drawing of the transmission part. 4. Refer to the assembly drawing for the overall relative position. Common problems and troubleshooting. For more questions about energy-saving ball mills, please consult our staff
|Processing capacity (t/h)||effective volume (m3)||Maximum ball load(t)||weight
|MQGg 1212||1200||1200||Y200L2-6||22||3512||2076||1620||0.17 ~4.1||1.14||2.4||9610|
|MQGg 1224||1200||2400||Y280M-8||45||5745||2352||1778||0.26 ~6.15||2.4||4.6||12692|
|MQGg 1530||1500||3000||JR117-8||80||7253||3070||2280||2.8 ~9||5||10||21425|
|MQGg 1830||1800||3000||JR136-8||180||8250||3620||2785||4.5 ~27||6.65||14||31850|
|MQGg 1836||1800||3600||JR136-8||180||8866||3683||2785||4.5 ~29||8.2||13.8||35467|
|MQGg 2130||2100||3000||JR136-8||180||8220||4220||3083||6.5 ~36||9||27||43100|
|MQGg 2136||2100||3600||JR137-8||210||9154.5||4320||3433||7.5 ~42||10.8||23.5||45833|
|MQGg 2140||2100||4000||JR137-8||210||9654||4320||3083||7.5 ~45||12.8||22.5||47262.4|
|MQGg 2145||2100||4500||JR137-6||280||10350||4253||3125||10 ~50||13.5||23.6||52648|
|MQGg 2230||2200||3000||JR137-8||210||8220||3864||3183||7.5 ~45||9.8||20.6||44600|
|MQGg 2430||2400||3000||JR138-8||280||9023.5||4836.4||3490||7.2 ~92||11.5||22.5||59544.5|
|MQGg 2436||2400||3600||JR138-8||320||9604.5||4836.4||3490||8 ~100||13.8||25.5||63932.5|
|MQGg 2442||2400||4200||JR138-8||320||10204.5||4836.4||3490||8 ~110||16||30||67370|
|MQGg 2721||2700||2100||JR138-8||245||8300||4786.4||3495||7.2 ~84||10.7||23||66743|
|MQGg 2727||2700||2700||JR137-6||280||8901||4786.4||3490||7 ~110||13.8||29||71030|
|MQGg 2730||2700||3000||JR1410-8||320||9610||5000||3495||8 ~115||15.3||32||83909.2|
|MQGg 2732||2700||3200||JR1410-8||320||10724||5000||3620||8 ~120||15.7||32||88073|
|MQGg 2740||2700||4000||JR158-8||380||10609||5150||3620||12.5 ~152||19||42||98454|
The Energy Saving Ball Mill is a high-efficiency and energy-saving grid-type ball mill that uses rolling bearings.
The wet rod mill is a grinding equipment that uses steel rods as grinding media.
Wet grid type ball mill is a traditional ball mill that relies on the discharge grid to discharge ore forcibly.
A ball mill with simple structure and auto-flowing pulp discharge.
An overflow ball mill with rolling bearings, high efficiency and energy saving.
A wet autogenous grinding mill that materials as grinding media
You can fill in your demand information in the form below, and our technical and sales staff will get in touch with you as soon as possible. In order to ensure that your information can be processed in a timely manner, please be sure to fill in your contact number accurately!